Aux - Teac NS-X1 El Manual Del Propietario

Saving preset stations
1
Press the FUNCTION button on the unit or the remote
control repeatedly until "FM" appears on the display.
FM is selected as the input source.
2
Select a station automatically or manually.
See "Auto tuning" on page 19 to select a station automatically.
o
See "Manual tuning" on page 19 to select a station manually.
o
See "Tuning in a preset station" on page 19 to select a station
o
manually.
When the station selected is already stored, a number will be
o
shown on the right side of the display. When the station is not
stored, "P- -" will be displayed.
3
Press the ENTER button on the remote control.
M a n u a
9 9 .
4
Press the PREVIOUS (.) or NEXT (/) button to select
the number you want to use as a preset number.
5
Press the ENTER button to save the station with the
selected preset number.
l
5 0 M H z P - -

AUX

Playing music from external devices
1
Connect your external device to the unit.
For detailed information on connecting the external device, see
"Connecting an external device" on page 11.
2
Press the FUNCTION button on the unit or the remote
control repeatedly until "AUX" appears on the display.
AUX is selected as the input source.
3
Start playback.
You cannot control the external device from the unit or by
o
using the remote control. You can control the playback option
from the external device only.
You can adjust the volume level setting from the unit or by
o
using the remote control.
21