Teac NS-X1 El Manual Del Propietario página 25

Other network settings
1
From the "Settings" menu, select "Network" and then
"Other".
N e t w o
> O t
h e
N e t w o
2
Change the following settings if necessary.
Menu item Description
Change the name of the unit that
Name
appears on the network.
Reset all the settings to the factory
Factory Reset
default.
Changing the name of the unit
1
From the "Settings" menu, select "Network" w "Other"
w "Name".
> N a m e
F a c t
> N S
- X
D e f a u
You can select the current name of your unit or "Default".
o
If you select the current name, you can change it to any name
o
you like. If you select "Default", the name of the unit will be
changed automatically to the default setting.
The default setting is "NS-X1".
o
r k C o n n
r
r k I n f o
o r y R e s e
1 2 2 1 3 8 F
l t
2
To change the name of the unit, select the current name,
and then press the ENTER button
N a m e
0 1 2 3
Press the UP or DOWN (
o
of numbers, letters or characters.
Move the cursor to the desired number, letter or character by
o
pressing the LEFT and RIGHT (g and t) buttons, and then
press the ENTER button to enter the selected number.
To delete the selection, select "<".
To confirm your entry, select "E".
To cancel and return to the previous menu, select "C".
3
Press the ENTER button to complete the setting.
Network information
1
From the "Settings" menu, select "Network" and then
"Network Information".
N e t w o
O t h e
> N e
t w o
2
Check the following information if necessary.
Menu item Description
Shows the name of the unit
Name
displayed on the network.
Shows the status of the DHCP (On/
DHCP
Off).
IP Address Shows the IP address of the unit.
MAC Address Shows the MAC address of the unit.
4 5 6 7 8 9 < E C
5 or b) button to see different sets
r k C o n n
r
r k I n f o
25