Locking System; Storing The Helmet - SCHUBERTH C3 Manual De Usuario

i. mAinTenAnce And cAre
2. Having done that, slide the flat end
of the operating element under the
edge behind the ventilation cowl
and remove the latter by levering it
upwards.
3. On completion of the cleaning, fix
the ventilation cowl back in place
by hooking it into the front of the
ventilation mechanism and pressing
onto the helmet shell until you hear a
clearly audible "click".
4. When this has been done, insert
the operating element through
the ventilation cowl and into the
ventilation mechanism.
62

6. LOCKING SYSTEM

Ratchet fastener
The lock system's metal components require no maintenance.

7. STORING THE HELMET

When not in use, keep the helmet in the supplied helmet bag in a
dry, safe place. Always store the helmet so that there is no risk of it
falling onto the floor. Damage caused this way is not covered by the
guarantee.
Note:
Store the helmet out of reach of children and animals.
Note:
The active anti-fog coating also absorbs other chemical
substances such as solvents and can be damaged by them.
Therefore, avoid storing the faceshield and sun visor in the vicinity
of aggressive substances such as motor fuels.
63