Troubleshooting - melitta LATTEA Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 155

 Troubleshooting

Malfunction
coffee only runs
drop-by-drop
Coffee does not flow Water reservoir not
Grinder does not
grind coffee beans
Loud grinder noise
Bean symbols
are flashing although
the bean container is
filled.
symbol for the
milk shower
illuminated out of
sequence
Heft_Lattea_EU.indd 75
Cause
Grinding level too fine
filled or it is not inserted
correctly
Brew unit obstructed
Beans do not drop into
the grinder (beans are too
oily)
Foreign objects in the
grinder
Foreign objects in the
grinder
Insufficient quantity of
ground beans in the brew-
ing chamber
there is air in the lines
is
inside the appliance.
Measure
set the grinding level to a coar-
ser level
clean brewing unit
Decalcify if necessary
If necessary execute a cleaning
program
Fill the water reservoir and en-
sure that it is correctly seated
If necessary open the milk
shower until water runs out of
the appliance, and close milk
shower
clean the brewing unit
tap lightly on the bean contai-
ner
contact the hotline
contact the hotline
Press the control button for
single-cup dispensing
two-cup dispensing
If necessary open milk shower
until water runs out of the
appliance and then re-close the
milk shower
If necessary clean brewing unit
or

09.07.2009 15:29:13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido