CLEANING
WARNING: Follow all manufacturer bleach container and germicidal disinfectant safety guidelines.
CAUTION: Frequent heat drying and bleaching will cause fabric to break down. Air drying and cleaning without bleach are
recommended whenever possible to help extend the life of the cover.
Spray with common household or
commercial antibacterial cleansers or
disinfectants. Wipe with a damp, water-
only cloth after disinfecting. Let dry
completely before use.
CAUTION: DO NOT wash or dry Stretch-Air, COMFORT-TEK or GlideWear covers with hook and loop fasteners or other
materials that could snag the fabric. Doing so could pull at the fabrics, causing changes in the appearance (but not the
effectiveness) of the fabrics.
IMPORTANT! Before cleaning or disinfectiong, remove the cover (and foam, for the Premium Pad) from the support pad and hardware.
Cleaning: When possible, hand wash in warm water with mild soap, rinse thoroughly with clean water, and air dry (let dry completely before
use). Or machine wash using common laundry detergent and tumble dry low.
Hand Wash
Disinfecting - Premium Pad: Machine wash hot (without the foam insert) using common
laundry detergent. Let dry completely before use.
Disinfecting - Basic Pad: Wash the cover with water and bleach. Rinse thoroughly. Follow the
directions on the bleach container. Let dry complete
bleach using 1 part household liquid bleach per 9 parts warm 40°C/104°F water. Rinse
thoroughly with clean water. Let dry completely before use.
WARNINGS: DO NOT use contaminated foam with multiple users. D
foam. Replacement foam components may be purchased separately.
CAUTIONS: DO NOT submerge the foam in any liquid, including water. The
period of time. Light will cause discoloration of the foam. (Note: Discoloration will not affect the functional features. There is no need to
attempt to "clean" discoloration caused by light exposure.)
Soiled foams should be replaced. Remove the cover. Wipe lightly with a damp cloth. DO NOT
use soap. Let dry completely before replacing the cover.
Before cleaning or disinfectiong, remove the cover support pad from the hardware.
m (40°C/104°F)
Cleaning: Hand wash in war
water with soap and a sponge. Rinse with
clean water and wipe dry with
. Dry completely before use.
cloth
BodiLink Head Support User Guide & Manual
SURFACE CLEANING COMFORT-TEK FABRIC ONLY*
Antibacterial or Disinfectant Spray
CLEANING AND DISINFECTING (ALL FABRICS)
Machine
wash at the
temperature
Air Dry
shown.
ly before use. May hand wash with
SUPPORT FOAM
CLEANING AND DISINFECTING (HARDWARE)
a clean
Hand Wash
Tumble Dry
Low
isinfectants are NOT effective on porous surfaces such as
foam should not be exposed to light for any extended
Disinfecting: Wipe gently with a cloth
dampened with a household disinfectant.
Rinse with clean, warm water. Wipe dry with
. Dry completely before use.
a clean cloth
20
Wipe with Water Only
Do Not Steam
Clean or
Autoclave
Do Not Iron
Machine wash
at the temperature shown.
Bleach (1 part bleach per 9 parts water)
Wipe with
Water Only
Air Dry
Wipe with
Water Only