Cleaning; Care Symbols - Permobil BodiLink Head Support Operación Manual

CLEANING

WARNINGS:
- Follow all manufacturer bleach container and germicidal disinfectant safety guidelines.
- Before transferring to a new user, the product must be completely cleaned and disinfected.
- Periodically, check the cover and components for damage and wear, and replace if necessary. Some wear with regular use
is expected.
CAUTION: Frequent heat drying and bleaching will cause fabric to break down. Air drying and cleaning without bleach
are recommended whenever possible to help extend the life of the cover.
Spray with common household or commercial antibacterial cleansers or disinfectants. Wipe with a
damp, water-only cloth after disinfecting. Let dry completely before use.
CAUTION: Remove the cover from the foam and any inserts before cleaning or disinfecting.
Cleaning: When possible, hand wash in warm water with mild soap, rinse
thoroughly with clean water, and air dry (let dry completely before use).
Or machine wash using common laundry detergent and tumble dry low.
Disinfecting Premium Pad: Wash the cover with water and bleach. Rinse thoroughly. Follow the
directions on the bleach container. Let dry completely before use. May hand wash with bleach
using 1 part household liquid bleach per 9 parts warm 40°C/104°F water. Rinse thoroughly with
clean water. Let dry completely before use.
Disinfecting Basic Pad: Machine wash hot using common laundry detergent. Tumble dry low.
Let dry completely before use.
WARNINGS: DO NOT use contaminated foam with multiple users. Disinfectants are NOT effective on porous surfaces
such as foam. Replacement foam components may be purchased separately.
CAUTIONS: DO NOT submerge the foam in any liquid, including water. The foam should not be exposed to light for any
extended period of time. Light will cause discoloration of the foam.
Note: Discoloration will not affect the functional features. There is no need to attempt to "clean" discoloration caused by light
exposure.
To clean the foam: Soiled foams should be replaced. Remove the cover. Wipe lightly with a damp
cloth. DO NOT use soap. Let dry completely before replacing the cover.
CAUTION: Before cleaning or disinfecting, remove the cover support pad from the hardware.
Cleaning: Hand wash in warm (40°C/104°F) water with soap and a sponge. Rinse with clean water
and wipe dry with a clean cloth. Dry completely before use.
Disinfecting: Wipe gently with a cloth dampened with a household disinfectant. Rinse with clean,
warm water. Wipe dry with a clean cloth. Dry completely before use.
Wipe with a damp cloth.
Do not tumble dry.
Bleach (1 part bleach: 9 parts water)
1: 9
* maximum temperature shown
BodiLink Head Support Operation Manual
SURFACE CLEANING COMFORT-TEK FABRIC ONLY
CLEANING AND DISINFECTING ALL FABRICS
FOAM
CLEANING AND DISINFECTING HARDWARE

CARE SYMBOLS

Hand wash.
Tumble dry low.
40C Machine wash warm*.
22
40C
OR
40C
1:9
60C
40C
Dry flat.
Hand wash warm*.
40C