Nikon WX Manual De Instrucciones página 26

Attaching tripod adapter TRA-5
Jp
to the binoculars
En
* Make sure not to drop the binoculars
Es
because they are heavy.
* 2 , 3 , and 5 refer to the parts indicated
Fr
in (F).
De
1) Open the interpupillary distance on the
binoculars.
It
2) Rotate the attachment screw ( 3 ) of
Se
the clamp ( 2 ) on the tripod adapter
counter-clockwise using a coin, etc. to
Nl
remove the clamp.
Ru
3) Insert the tripod adapter from the
objective lens side of the binoculars.
Pb
• Set the central shaft of the binoculars
Pl
into the central shaft holder ( 5 ) of
the tripod adapter (G).
Fi
• Make sure not to damage the binoculars.
No
4) Attach the clamp ( 2 ) to the tripod
adapter, and rotate the attachment
Dk
screw ( 3 ) clockwise to fasten the
Cz
binoculars to the tripod adapter.
• After tightening using your fingers,
Ro
tighten using a coin, etc.
Hu
5) Finely adjust the interpupillary
distance on the binoculars.
• For adjusting the interpupillary
distance, please refer to the image on
page 22.
Attachment is finished as shown in (H). You
can also store it in the case while the tripod
adapter is attached.
26
G
H
Central shaft