Safety In Cleaning And Maintenance; Safety When Using The Pyrolytic Cleaning Cycle - Pando PHT-941 Manual De Uso

• The tray and rack have a system for easy partial removal
and handling of food. Always place these accessories inside
the oven, as indicated in the Accessories section.
• The oven heats up when in use, so always use oven gloves
when performing operations inside the oven and avoid
touching the heating elements.
• Only use the supplied temperature probe inside the oven (in
models that come with this feature).
Safety for cleaning and maintenance
• Disconnect the appliance from the mains power supply be-
fore any operation.
• Do not use steam cleaners or pressurised water to clean the
oven.
• Do not use metal scouring pads, wire brushes or commer-
cially available or abrasive powder cleansers to clean the
oven door as they can scratch the surface and cause the
glass to break.
• Cleaning and maintenance tasks to be carried out by the
user should not be done by children without supervision.
• before replacing a bulb, first make sure that the oven has
been disconnected from the mains to avoid the possibility of
receiving an electric shock.
• Remove all accessories and dishes from the oven, including
the shelf supports and/or telescopic runners.
• Clean any spillages or excess dirt, as during the pyrolytic
cleaning cycle these could ignite and become a fire hazard.
• For your safety, never operate the oven without the back
panel (that protects the fan) in place.

Safety when using the pyrolytic cleaning cycle

before starting the cleaning cycle:
• CAUTION: Remove all accessories and dishes from the oven,
including the shelf supports and/or telescopic runners.
English
Installation & Maintenance
31