Installation - ABB B23 Manual De Instalación

EN
Technical Data
Fast trans. burn test
Immunity HF-fields
Immunity conducted
RF Emission
ESD
Standards
Accuracy class

Installation

For information about how to mount and install the equipment, follow
the instructions in the Installation Guide at the end of this manual.
E
Warning – Working with high voltage is potentially lethal. Per-
sons subjected to high voltage may suffer cardiac arrest, burn
injuries, or other severe injuries. To avoid such injuries, make
sure to disconnect the power supply before you start the instal-
lation.
Direct conn.
4 kV ( IEC 61000-4-4 )
80 MHz - 2 GHz at 10 V/m (IEC61000-4-3)
2 kHz - 150 kHz
150 kHz – 80 MHz ( IEC 61000-4-6 )
EN 55022, class B (CISPR22)
15 kV ( IEC 61000-4-2 )
IEC 62052-11, IEC 62053-21,
IEC 62053-22, IEC 62053-23, GB/T
17215.211-2006, GB/T 17215.321-
2008,GB/T 17215.322-2008, GB 4208-
2008, EN 50470-1, EN 50470-3 category
A,B & C
Class 1 & class 2
7
Indirect conn.
Class 0,5 S &
class 2
EN