Technical Data; Installation - Electrolux EWG 147540 W Manual De Instrucciones

If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, se-
rial number and purchase date of your ma-
chine: the Service Centre will require this
information.

TECHNICAL DATA

Dimensions
Electrical connection
Water supply pressure
Level of protection against ingress of solid particles and moisture
1)
Water supply
Maximum Load
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.

INSTALLATION

UNPACKING
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.
1. After removing all the packaging, care-
fully lay machine on it's back to remove
the polystyrene base from the bottom.
Width / Height / Depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
Cotton
Maximum
2. Remove the power supply cable and
596 / 820 / 544 mm
220-230 V
2000 W
10 A
50 Hz
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
IPX4
Cold water
7 kg
1400 rpm
the draining hose from the hose holders
on the rear of the appliance.
electrolux 23
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...