Programmed Maintenance; Recommended Brushes - Tornado 99790 Manual De Operaciones Y Mantenimiento

PROGRAMMED MAINTENANCE

TASK
RECOVERY TANK CLEANING
SUCTION FILTER CLEANING
SOLUTION TANK FILTER CLEANING
BRUSHES CLEANING
BRUSHES DISASSEMBLY AND CLEANING
SQUEEGEE CLEANING
FRONT SQUEEGEE RUBBER REPLACEMENT
REAR SQUEEGEE RUBBER REPLACEMENT
SPLASH GUARD RUBBERS REPLACEMENT
CHECK SQUEEGEE ADJUSTMENT
SQUEEGEE HOSE CLEANING
SOLUTION TANK CLEANING
CHECK BATTERIES ELECTROLYTE
CHECK OF THE BRAKES
TRACTION MOTOR CHECK
BRUSHES MOTOR CHECK
SUCTION MOTORS CHECK
CHECK BRUSHES BASE GROUPS
SCREW TIGHTENING
*The hours refer to the ones indicated on the display (see under paragraph "HOUR METER").

RECOMMENDED BRUSHES

Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
NYLON
TYNEX
BRISTLES THICKNESS
MACHINE CODE
BD 40/66 48902050
48902020
48902030
48902060
48902040
48802010
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 140°F (60°C). It is
not hygroscopic.
Excellent wear resistance, even with hot water over 140°F (60°C). It is hygroscopic. It
looses its physical characteristics over the time.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the
floor or ruin the polishing.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, it is recommended to use softer bristles
which penetrate more easily and deeper. Please be aware that when brush bristles are
worn out and therefore too small, they become rigid and unable to penetrate and clean
deeper. This may also happen with thicker bristles creating brush vibration.
Qty DESCRIPTION
2
Brush PPL 0,0.6 Ø 20"
2
Brush PPL 0.7 Ø 20"
2
Brush PPL 0,9 Ø 20"
2
5 Mix Brush Ø 20"
2
Abrasive Brush 1.2 Ø 20"
2
Pad Holder w/Green Center Lock
DAILY 20 HOURS*
X
X
X
X
X
X
X
X
X
X
X
USE
Smooth floors with small joints and persistent dirt.
Smooth floors with small joints and persistent dirt.
Floors of resistant material and particularly dirty.
For all types of floors.
Floors of resistant material and particularly dirty.
For pads of 19".
19
200 HOURS* 500 HOURS*
X
X
X
X
X
X
X
X