Base Assembly; Cleaning, Care And Storage; Warranty - Parkside PFBS 160 A1 Instrucciones De Utilización Y De Seguridad

The stretch stand
16
the upper tube of the stretch stand
to the left (–). Extend the tube to the maximum
height and secure by turning to the right (+).
The holder is also height adjustable, simple
15
turn the black thread to the left. After adjusting
the holder to the correct height, turn the thread
in the opposite direction to tighten.
Secure the tool to the holder
stand . This holder
16

Base assembly

Using the attachment, the tool is particularly suited
for cutting special shapes (holes for sockets, etc.).
Attach the milling bit
„Attaching / changing the tool / collet".
Unscrew the union nut from the tool, turning
clockwise, and put aside.
Screw the base
12
To set the correct working depth, loosen the
locking screw and adjust the bottom of the
11
base assembly to the desired size.
Then tighten the locking screw

Cleaning, care and storage

RISK OF INJURY! Switch the
tool off and pull the plug out of the mains socket
before carrying out any work on the tool.
Always keep the tool clean, dry and free of oil
or grease.
Use a dry cloth to clean the housing.
If the connection cable needs to
be replaced, this repair must be performed by
the manufacturer or a representative to prevent
safety hazards.
Carefully store the tool and all parts in desig-
nated plastic case to prevent losing any parts.
Start-up / Cleaning, care and storage / Warranty
is height adjustable. Loosen
by turning
16
of the stretch
15
rotates by 360°.
15
as described in chapter
27
onto the unit.
.
11

Warranty

The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering
not carried out by our authorized service branch. Your
statutory rights are not restricted in any way by this
warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
Service Great Britain
Tel.: 0871 5000 720
(0,10 GBP/Min.)
e-mail: kompernass@lidl.co.uk
IAN 96078
MT
Service Malta
Tel.: 80062230
e-mail: kompernass@lidl.com.mt
IAN 96078
GB/MT 43