Festo HGPLE Serie Instrucciones De Utilizacion página 21

HGPLE
Mounting the gripper
Note
Accumulation of heat caused by restricted mounting locations.
Material damage or malfunctions.
Mount the HGPLE with sufficient space for heat dissipation.
•
1. Press 2 centring sleeves ZBH-9 into the fitting holes of the gripper.
2. Use the centring sleeves to position the gripper on the connecting surface.
3. Select the mounting screws depending on the type of mounting (
4. Tighten the mounting screws with the corresponding tightening torque (
Direct mounting
from above
Fig. 3 Types of mounting
Size
Screws for mounting from above
Tightening torque
Screws for mounting from underneath
Tightening torque
Tab. 2
Adapter kits (
Festo – HGPLE – 1405a English
from underneath
[Nm]
[Nm]
www.festo.com/catalogue)
Fig. 3).
Tab. 2).
Mounting with adapter kit
from above and from underneath
14 25
M4 M5
3 6
M5 M6
6 10
21