Install Filters - Broan Best K260A Manual De Instalación

Ocultar thumbs Ver también para Best K260A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

14. INSTALL FILTERS

It is recommended to install side filters first and finish with center one(s).
1.
Insert upper end of filter into the hood (tab end).
2.
Raise lower end toward the inside of hood.
3.
Position lower end of filter into channel and pull.
4.
While pulling the filter, slide it under the inner retaining piece.
HD0009
Baffle filters are available as an option (see instruction sheet included with baffle filters).
15. USE AND CARE
Grease filters and impeller(s).
The grease filters, impeller(s) should be cleaned frequently. Use a warm detergent solution.
Grease filters and impeller(s) are dishwasher safe.
Remove filters by pushing filters towards the back of hood and rotating filters downward.
Hood cleaning
Stainless steel cleaning: How to maintain its "BRIGHT LOOK"
Do: • Regularly wash surfaces with clean cloth or rag soaked with warm water and mild
soap or liquid dish detergent.
• Always clean in the direction of original polish lines.
• Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.
• You may also use a specialized household stainless steel cleaner.
Don't: • Do not use any steel or stainless steel wool or any other scrapers to remove stubborn dirt.
• Do not use any harsh or abrasive cleansers.
• Do not allow dirt to accumulate.
• Do not let plaster dust or any other construction residues reach the hood. During
construction or renovation, cover the hood to make sure no dust sticks to stainless
steel surface.
Avoid: when choosing a detergent:
• Any cleaners that contain bleach will attack stainless steel.
• Any products containing : chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.
• Any combustible products used for cleaning such as acetone, alcohol, ether, benzol,
etc., are highly explosive and should never be used close to a range.
Enamel finish:
Clean with warm water and mild detergent only. When discoloration occurs, use a good
enamel polish such as automotive polish. (DO NOT use rough abrasive cleaner or porcelain
cleaner.)
HD0056
- 10 -

Publicidad

Tabla de contenido
loading

Tabla de contenido