Light Bulbs - Broan Best K260A Manual De Instalación

11. INSTALL THE OPTIONAL SOFFIT CHIMNEY (ALL BLOWERS)
(OPTIONAL) FK260 Series
From inside the hood, attach flue to top of hood at
sides and front of hood using #8 screws (provided).
12. INSTALL THE BLOWER (INTERIOR OR EXTERIOR BLOWER)
Refer to instructions included with
blower.
Once the blower is installed, plug the
power supply to the 3-prong male
connector (A) and the blower unit into
the 2-prong female receptacle (B) inside
the hood.
!
WARNING
Never plug the 2-prong blower cord
to the 3-prong power supply cord.

13. LIGHT BULBS

This range hood must use shielded halogen lamps (120 V, 50 W, MR16 with GU10 base or
PAR16 with GU10 base).
!
In order to prevent the risk of personal injury,
do not install a lamp identified for use only in
enclosed fixtures.
1. Install the lamps by placing the bulb leads into their
grooves in the socket.
2. Gently push upwards and turn clockwise until secure.
In order to prevent the risk of personal injury, the halogen lamps must be cooled down
before removing them.
To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads
from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.
WARNING
WARNING
!
HD0050
A
HE0003
1
HO0090
- 9 -
B
2