Install Filters - Broan best K260A Manual De Instalación

13. INSTALL FILTERS

It is recommended to install side filters first and finish with center one(s).
1. Insert upper end of filter into the hood.
2. Raise lower end toward the inside of hood.
3. Position rear part of filter into channel and pull.
4. While pulling the filter, slide it under the inner retaining piece.
HD0009
Baffle filters are available as an option. (See instruction sheet included with BFK
Series baffle filters).
14. USE AND CARE
Grease Filters
The grease filters and impeller(s) should be cleaned frequently. Use a warm detergent
solution. Impellers and grease filters are dishwasher safe.
Remove filters by pushing filters towards the back of hood and rotating filters
downward.
Hood Cleaning
Stainless steel cleaning: How to maintain its « BRIGHT LOOK »
Do:
- Regularly wash surfaces with clean cloth or rag soaked with warm water and mild
soap or liquid dish detergent.
- Always clean in the direction of original polish lines.
- Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.
- You may also use a specialized household stainless steel cleaner.
Don't:
- Do not use any steel or stainless steel wool or any other scrapers to remove stubborn
dirt.
- Do not use any harsh or abrasive cleansers.
- Do not allow dirt to accumulate.
- Do not let plaster dust or any other construction residues reach the hood. During
construction or renovation, cover the hood to make sure no dust sticks stainless
steel surface.
HD0056
- 9 -