Preparing The Light Tower Trailer For Use - Allmand NIGHT-LITE GR Serie Manual Del Operario

2
J
K
L
Ref Description
J Lifting Ring
K Control Compartment Cover
L Outrigger / Stabilizer Jack (2)
M Light Tower Mast Rotation Locking Knob
N Light Tower Mast Rotation Handle
3a
P
O
3b
N
M
Ref
O
P
Q
Preparing the Light Tower
Trailer for Use
Operating or towing a machine with worn, damaged
or missing parts could result in death or serious injury.
Replace worn, damaged or missing parts immediately. Do
not operate or tow this machine until all worn, damaged
or missing parts have been replaced, and the machine
operates correctly.
Towing a trailer with worn, damaged or underinflated tires
could result in death or serious injury. Replace worn or
damaged tires immediately. Keep tires inflated to correct
Q
cold tire inflation pressure.
NOTICE
The use of authorized replacement Allmand parts is
recommended. The warranty does not cover damage or
performance problems caused by the use of parts that are
not authorized replacement parts.
If the light tower trailer has been stored or not operated
for a period of time, follow these steps to prepare the
Night-Lite™ GR-Series light tower trailer for use.
1. Make sure that a copy of the Operator's Manual
2. Make sure that all safety decals are legible and in
3. Do a check of the light tower trailer for correct
O
Description
Power Inlet Panel
Light Control Panel
Auxiliary AC Outlets
WARNING
WARNING
is with the light tower trailer in the manual storage
container.
place on the light tower trailer. See Safety Decals in
the Operator Safety section.
operation:
A. Make sure that the trailer tongue is locked in
either the park or towing position. See Trailer
Tongue.
P Q
en
7
English