Adjusting The Picture Quality - Denon DVD-2200 Instrucciones De Operación

(8) Using the SRS TruSurround function (only for DVD-videos and Video CDs)
The multi-channel sound normally achieved with five speakers is recreated using only the two front stereo
2
speakers. This results in a sound with a nearly natural sense of movement that seems to surround the head,
without the strong directivity characteristic of multi-speaker systems.
During playback, press the SRS TS button on the remote control
unit.
• Press the button again to cancel the TruSurround function.
NOTES:
• This function only works with DVD-videos and video CDs only.
• The SRS TS function does not work at the time of multi-channel setting. Set "AUDIO CHANNEL" under
"AUDIO SETUP" at "SETUP" to "2 CHANNEL".
• Note that for some discs the effect will be weak or there will be no effect.
• Turn off other surround functions (the TV's surround mode, etc.).
• The SRS TS function only works for analog audio output signals. The digital audio output signals do not
change.
is a trademark of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS
Labs, Inc.
(9) Selecting the still image (only for DVD-audios)
During playback, press the PAGE + or PAGE - button on the
remote control unit.
• For DVD audio discs with still images, the desired image
can be selected.
• On some discs the image cannot be selected due to the
intentions of the discs' producers.
(10) Playing bonus groups (only for DVD-audios)
In the stop mode, press the SEARCH MODE button on
1
the remote control unit to set the search mode to
"GROUP".
2
Use the number buttons to input the bonus group number.
Use the number buttons on the remote control unit to
input the password (4 digits), then press the ENTER
3
button.
• Playback starts from the first track in the specified group.
• In some cases the password must be input at the menu screen. In these cases, follow the instructions on
the screen.
• Once the password is input, the disc can be played as many times as you want until it is removed.
• If you make a mistake when inputting the password, press the CLEAR button on the remote control unit.
10
SRS TS
Main unit Remote control unit
1
2
PAGE
Remote control unit
SEARCH MODE
3
Main unit Remote control unit
1 2 3
4 5 6
Remote control unit
7 8 9
0 +10
ENTER
Remote control unit
4

ADJUSTING THE PICTURE QUALITY

7
0
TOP MENU
T. MENU
2, 3, 4, 5, 7, 8
2, 6, 9
MENU
STOP
SKIP
ANGLE SUBTITLE
REPEAT
SETUP DIMMER
Press the PIC.ADJ button during playback.
Use the and cursor buttons to select the
0 1
picture memory, then press the ENTER button.
• The display switches as follows:
STD (STANDARD) ´ M1 (MEMORY 1) ´ M2
´ M3 ´ M4 ´ M5
STD (Factory default)
When this is selected, both the picture quality
and function are reset to normal.
M1 ~ M5
Picture quality settings you have adjusted can
be stored here.
Select the item to change using and buttons.
0 1
ADJUST MODE
• The contrast, brightness, sharpness and color
(HUE) can be adjusted.
• Perform steps 4 ~ 6 to adjust the picture quality
(ADJUST MODE).
GAMMA (-6 ~ +6)
• Select this if dark portions of the picture are
too dark or bright portions are too bright.
• Perform steps 7 ~ 9 to adjust the gamma
correction (GAMMA).
Press the ª cursor button to select the adjust
mode, then use the and cursor buttons to
0 1
select the image quality adjustment item.
CONTRAST (-6 ~ +6)
Adjusts the contrast of the image.
BRIGHTNESS (0 ~ +12)
Adjusts the picture's brightness.
SHARPNESS (-6 ~ +6)
Adjusts the sharpness of the picture.
HUE (-6 ~ +6)
Adjusts the balance of the green and red. (This
does not affect Progressive Scan images and the
component video out.)
8 9
CALL RETURN
+10
DISPLAY
DISP.
ENTER
PLAY
STILL /
PAUSE
SLOW / SEARCH
AUDIO SEARCH MODE
A-B RANDOM MARKER
PIC.ADJ
1
ZOOM PAGE
PIC.ADJ
Remote control unit
P I CTURE ADJUS T
P I C TURE MODE
STD M1 M2 M3 M4
Remote control unit
ENTER
Remote control unit
MEMORY 1 GAMMA
0 0 0
Remote control unit
MEMORY 1 GAMMA
CONTRAST
0 0 0
Remote control unit
Remote control unit
ENGLISH
M5
0
0
23