Denon DVD-2200 Instrucciones De Operación página 24

ENGLISH
Use the • and ª cursor buttons to set the
5
adjustment value.
Press the ENTER button.
6
• All the adjustments are stored in the memory.
Use the and cursor buttons to select the
0 1
7
point to be set.
Use the • and ª cursor buttons to adjust the
brightness level of the selected point.
(See "Reference" on page 24.)
• The level decreases (the picture gets darker)
when the ª cursor button is pressed and
increases (the picture gets brighter) when the
• cursor button is pressed.
8
• Values from 16 to 235 can be set. It is not
possible to set in such a way that the level of
dark sections exceeds that of bright sections.
NOTE:
• When the CLEAR button is pressed during
gamma correction, all the setting points are
set back to the standard level.
Press the ENTER button.
9
• All the adjustments are stored in the memory.
To exit the picture adjust mode
Press the PIC.ADJ button.
24
Remote control unit
ENTER
Remote control unit
MEMORY 1 GAMMA
- - -
235
TV
Remote control unit
0
0 DISC 100
Remote control unit
ENTER
Remote control unit
REFERENCE:
(1) On the gamma correction display, the horizontal axis indicates the
brightness level of the image as recorded on the disc, while the
vertical axis indicates the brightness level of the image when
output from the set.
(2) When a bright point on the disc side is adjusted to "dark" on the
output side as shown in the diagram at the right, normally the
details of bright sections that are hard to see become easier to
see.
(3) When a bright point on the disc side is adjusted to "bright" on the
output side as shown in the diagram at the right, normally the
details of dark sections that are hard to see become clearer.
MEMORY 1 GAMMA
- - -
235
TV
0
0 DISC 100
MEMORY 1 GAMMA
- - -
235
TV
0
0 DISC 100
MEMORY 1 GAMMA
- - -
235
TV
0
0 DISC 100