Denon DVD-2200 Instrucciones De Operación página 7

(2) Connecting to a TV or Monitor Equipped with Color Component Input
Connectors
Color component output connectors (P
The red (P /C ), blue (P /C ) and brightness (Y) signals are output independently, achieving
R R B B
more faithful reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors
(P , P and Y/R-Y, B-Y and Y/C , C
R B R
instructions.
• Connect in this way if your TV is compatible with Progressive Scan.
If necessary,
connect the video
terminals, referring
to page 6.
TV
Y P /C P /C
B B R R
COMPONENT VIDEO IN
NOTES:
• Use the three commercially available video cords to connect the DVD-2200's color component output
connectors to the TV or monitor.
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to comply with your TV's video format. When the TV
is PAL formated, set to PAL. (See page 16.)
• Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV. (NTSC formated
only)
• To use with 2-channel audio output, set "2 CHANNEL" in "AUDIO CHANNEL" in "AUDIO SETUP" in
"SETUP" at the initial settings. (See page 17.)
• Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to comply with your TV's aspect. (See page 16.)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
/C , P /C and Y)
R R B B
and Y, etc.). For details, refer to the TV's operating
B
DVD-2200
To power outlet
L R
AUDIO IN
(3) Connecting to a TV with 21-pin SCART Terminal
• Use the commercially 21-pin SCART cable to connect the TV's 21-pin SCART terminal to the DVD-2200's 21-
pin SCART terminal (AV1).
21-pin SCART terminal
TV
DVD-2200
• Some discs contain copy prohibit signals. If such
discs are played via a VCR, the copy prohibit system
may cause disturbance in the picture.
To power outlet
NOTES:
• Set the "TV TYPE" in "VIDEO SETUP" in "SETUP"
to comply with your TV's video format. When the
TV is PAL formated, set to PAL. (See page 16.)
ENGLISH
7