Interim Storage; Disposing Of The Packaging Material; Electrical Connection - Steelcase Flex Collection Desk Instrucciones De Uso

_______________________________________________________________
4.1 Safety-relevant information
Risk of injury or damage!
The fastening screws could tear if the desk
is lifted by the desktop or the attached
components.
 Always take hold of the desk at the
underframe to transport or move it.

4.2 Interim storage

If you want to store the desk temporarily before
installation, the following conditions must be met:
■ Intact transport packaging
■ The floor must have sufficient load-bearing
capacity
■ Dry floor
■ Level placement surface
■ Temperature range: +10 °C to +40 °C.
■ Max. rel. humidity: 80 %
EN
4.3 Checking the delivery
contents
After unpacking, check the product immediately for
damage sustained during transportation and for
completeness; inform the manufacturer of any
damage as soon as possible.
4.4 Disposing of the packaging
material
The packaging includes the following:
■ Outer packaging made of cardboard
■ Shrink film made of polyethylene (PE)
■ Bubble wrap made of polyethylene (PE)
■ Edge protectors made of cardboard or
polyethylene (PE)
■ Corner protectors made of polyethylene (PE).
These materials are recyclable. If assembled by
Steelcase or an assembly company authorised by
Steelcase, the manufacturer will dispose of the
packaging. If you assemble the desk yourself, please
ensure that the packaging material is correctly sorted
by type and returned to the recycling process.
10
Transport and storage
4.5 Assembly
Please comply with the provided assembly
instructions when assembling the Flex Height-
Adjustable Desk.
Steelcase recommends having the retailer
or an assembly company assemble the
furniture.
Attaching accessories
For attaching accessories, please follow the attached
assembly instructions.
4.5.1 Disassembling the desk
The desk can be dismantled into its pre-assembled
components. Disassembling should be carried out by
skilled and qualified personnel only. Follow the
separate disassembly instructions.
After disassembling the desk, for example for
transport reasons:
ATTENTION
Risk of damage to the desktop!
Reassemble the two side frames only with the
appropriate desktop cross-member of the same
desk.
ATTENTION
Risk of damage to lift mechanism!
Values stored in the controller
do not match the settings of
another desk.
4.5.2 Re-assembly
For the assembly, follow the separate assembly
instructions.

4.6 Electrical connection

Check the electrical equipment of the
desk. Rectify defects such as loose
connections or damaged cables
immediately.
156631