Controller - Toto REAH03B1U Manual De Instalación Y Del Propietario

When dirty
Under ordinary circumstances, please moisten a soft cloth with water, wring it out well, and wipe.
When extremely dirty, wipe with a soft cloth moistened with an appropriately diluted household
detergent, then wipe with a damp cloth.
WARNING
Do not splash water on the device or power plug
Electrocution or fire could result.
• Never use detergents marked as "acidic"/ "alkaline," scouring pads, or cleansers,
as these may damage the unit.
NOTE
• The Controller unit is made from plastic, so please do not wipe with dry cloth, toilet
paper, etc. This could lead to damage.
When not in use for a long time
If you do not use the product for a long time, drain the water according to the following procedure.
1. Drain the water in the tank by referring to "Before cleaning the tank" and "Cleaning the
tank 1-4".
2. Insert the power plug and wait for 10 seconds.
A little water comes out of the drain tube.
3. Unplug the power plug.
4. Close the drain valve, install the air intake valve (2 places), the feed inlet filter, and pull
out the drain tube.
5. Attach covers (3 places).
MAINTENANCE : CONTROLLER
32