Temperature Adjustment - Toto REAH03B1U Manual De Instalación Y Del Propietario

3) Starting and stopping the flow of water
NOTE
Hot water is not used for beverages.
Starting the flow : Water comes out when you hold out
your hand.
Stopping the flow: Water stops when you remove your hand.
Maximum continuous run time is 10 seconds.

■Temperature adjustment

• At center dial position, the output water temperature has been factory set to
97±3ºF(36±2ºC), when the water supply temperature is 59ºF(15ºC). Depending
on the water supply temperature and other local conditions, the output water
temperature as specified, may not be sustained. In such a case, adjust the
NOTE
output water temperature by turning the temperature control dial.
• To prevent scalding, the maximum output water temperature is ≤ 110ºF(43ºC)
at the temperature control dial highest limit.
• PLEASE DO NOT READJUST THE TEMPERATURE LIMIT STOP
By operating the temperature dial, the temperature can
be changed within the appropriate temperature range.
< Hot water output temperature adjustment range >
Water supply
temperature
41ºF (5ºC)
59ºF (15ºC)
77ºF (25ºC)
*When tank water is heating the temperature is 158ºF (70ºC) .
HOW TO USE
Guideline for temperature
adjustment range*
76ºF (25ºC)~96ºF (36ºC)
82ºF (28ºC)~100ºF (38ºC)
88ºF (31ºC)~104ºF (40ºC)
Center
Center
20