Installing Fan Without Light Kit - Harbor Breeze E-TLE44BNK5C1 Manual Del Usuario

FINAL INSTALLATION
Attach pull chain extensions (CC) or custom pull
6.
chain extensions (not included) to fan and light pull
chains.
Assembly is now complete.
Hardware Used
CC
Pull Chain Extension

INSTALLING FAN WITHOUT LIGHT KIT

1.
If you do NOT wish to use the light kit, remove 3
switch housing cap screws (N) from switch housing
cap (M) located on switch housing preassembled to
motor housing (D). Pull down gently on switch
housing cap (M).
Locate wires in switch housing labeled FOR LIGHT
and gently pull molex connections apart in order to
disconnect switch housing cap (M) from switch
housing.
6
x 2
1
N
Connections
Lowes.com/harborbreeze
12
CC
D
Switch Housing
Molex
M