GasGas enducross EC'08 Manual Del Usuario página 108

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Use the standard settings to adjust the rebound (turn it 6 positions
counterclockwise).
CAUTION
The left and right fork tubes must be at the same level and aligned
with the top bridge.
Compression dampening adjustment
- To adjust the compression, turn with your finger the adjusting knob
located at the top of the front fork.
- Adjust the compression to suit the rider's preference under
determined conditions.
- Use the standard measures to adjust the compression (turn it 6
positions counterclockwise).
Oil level adjustment
- Place a stand under the motorcycle engine (to keep it in a straight
and stable position).
- Remove the handlebar screws and remove the handlebar.
- Remove the suspension caps from the tubes.
- Compress the front fork slowly all the way.
- Lift the fork springs.
- Hold the suspension tube cap with a spanner, the loosen the cap
locknut.
- Remove the suspension tube caps.
- Remove the suspension srping guide.
- Use a wrench to remove the fork springs.
- Put the oil level gauge on the upper portion of the fork tube, and
measure the distance from the top of the fork tube to the oil level.
All manuals and user guides at all-guides.com
34
-
Standard oil level
Adjust the oil level as required within the adjustable range using the
following oil:
Oil recommended by the manufacturer.
-
110 mm
Fill the oil.

Publicidad

Tabla de contenido
loading

Tabla de contenido