GasGas enducross EC'08 Manual Del Usuario página 133

All manuals and user guides at all-guides.com
Setting the time
Enter the value for the time by
pressing button 1 in succession.
To go on to the next digit, press
button 3.
Confirm by pressing button 2.
Setting the pulse per
revolution (PPR)
Note:
This step is only to be taken on
vehicles that change the type of
PPR pulse at a specific number
of rpm.
If you do not know this value,
press button 2 to go on to the
next screen.
Enter the value by pressing
button 1 in succession. To go on
to the next digit, press button 3.
Confirm by pressing button 2.
- 59 -
Setting the pulse per
revolution (PPR)
The gauge receives one
electrical pulse for each
revolution on the engine (PPR).
Default value for 2 and 4 stroke
engines: 1 PPR.
Enter the value by pressing
button 1 in succession. To go on
to the next digit, press button 3.
Confirm by pressing button 2.
Setting the pulse per revolution
(PPR)
Note:
This step is only to be taken if a
value of 0 was entered in the
previous step.
Default value: 1.0
If you do not know this value,
press button 2 to go on to the
next screen.
Enter the value by pressing button
1 in succession. To go on to the
next digit, press button 3.
Confirm by pressing button 2.