GasGas enducross EC'08 Manual Del Usuario página 117

Drive Chain Lubrication
Lubricate the drive chain after driving on wet terrein or when the
chain looks dry. A high viscosity oil is preferred rather than a lower
viscosity because it will stick to the chain longer and lubricate the
chain better.
Apply oil to the sides of the chain rollers (A) for better oil penetration.
Wipe off any excess oil.
(A)
(A)
TUNE-UP
1. CARBURETOR TUNE-UP
Mixture
First step is to establish a basic knowledge on the identification and
operation of carburetor components. Change settings in accordance
with the temperature:
Condition Mixture
Cold air Lean
Warm air Rich
Dry air Lean
Low altitude Standard
High altitude Rich
All manuals and user guides at all-guides.com
(A). Apply grease.
Change setting
Rich
Lean
Rich
Standard
Lean
43
-
The main jet should be increased or decreased 1 to 5 sizes and
tested until the engine gives maximum power.
Main jet
It has a great overall effect. The number stamped on lower part of
the main jet indicates the size of the hole metering fuel. A greater
number corresponds to a bigger hole which supplies more fuel.
Gasoline is extremely flammable and can be explosive under certain
conditions. Always stop the engine and do not smoke. Make sure
the area is well ventilated and free from any source of flame or
sparks (this includes any appliance with a pilot light).
-
NOTE
(A). Main jet.
WARNING