Component Activation Function Chart - Whirlpool WTW7120HC Manual De Instrucciones

Component Activation Function Chart

NOTE: Some loads will not be available on all models.
Opening the lid during activation will stop the action. Press 'Back/Return' key to return to Component Activation.
of water valves as a safety feature. Additional features cannot be activated until the drain pump stops.
Function
Door Lock
Cold Water Valve
Hot Water Valve
OXI Valve*
Fabric Softener Valve
Add Min Water Level Turn On Heater*
Recirculation Pump*
Drain Pump
Toggle Shifter
Motor Slow Agitate
Motor Fast Agitate
Spin Low Speed
Spin Mid Speed
Spin High Speed
Unbalance Detection
Detergent Pump*
Softener Pump*
*Not available on all models. Display will show that the feature is 'activated' but there is no machine response.
DO NOT REMOVE OR DESTROY
FOR SERVICE TECHNICIAN'S USE ONLY
Locks the lid, pause 5 seconds, unlocks the lid, pause 5 seconds, complete.
Opens cold water valve for 10 seconds.
Opens hot water valve for 10 seconds.
Not available on all models.
– Opens OXI valve for 10 seconds.
Opens fabric softener valve for 10 seconds.
Not available on all models.
– Opens cold water valve, fills basket with water, turns on heater.
Not available on all models.
– Turns on recirculation pump for 30 seconds.
Turns on drain pump for 30 seconds.
Shift to wash, pause 10 seconds, shift to spin, pause 10 seconds, shift to wash, complete. Lid may
lock and the basket may spin slightly during shifting.
Lid locks, shift to wash, wash on slow for 10 minutes, and unlocks the lid.
Lid locks, shift to wash, wash on fast for 10 minutes, and unlocks the lid.
Lid locks, drain to empty, shift to spin, spin up to 140 RPM, hold at 140 RPM for 30 seconds, basket
stops, lid unlocks, and shifter releases. Basket may rotate slowly to verify shifter position before
spinning up to speed.
Lid locks, drain to empty, shift to spin, spin up to 500 RPM, hold at 500 RPM for 30 seconds, basket
stops, lid unlocks, and shifter releases. Basket may rotate slowly to verify shifter position before
spinning up to speed.
Lid locks, drain to empty, shift to spin, spin up to 850 RPM, hold at 850 RPM for 30 seconds, basket
stops, lid unlocks, and shifter releases. Basket may rotate slowly to verify shifter position before
spinning up to speed.
Lid locks, drain to empty, shift to spin, spin up to 500 RPM, hold at 500 RPM for 30 seconds, basket
stops, lid unlocks, and shifter releases. Basket may rotate slowly to verify shifter position before
spinning up to speed.
Not available on all models.
– Dose the bulk detergent for 30 seconds.
Not available on all models.
– Turn on softener pump for 30 seconds.
The drain pump may turn on after activation
Notes
5