Sensor Feedback Function Chart
NOTE: Some loads will not be available on all models.
Press 'Back/Return' key to return to Component Activation.
Function
Lid Switch
Lid Lock
Water Level Pressure Sensor
Inlet Thermistor
Detergent Level*
*Not available on all models. Display will show that the feature is 'activated' but there is no machine response.
6
FOR SERVICE TECHNICIAN'S USE ONLY
Open and close the lid to view the display change.
0 = Lid Open
1 = Lid Closed
The lid lock will cycle lock/unlock 3 times with 5 second pauses. The display will update the lid lock
state.
1 = Lid Unlocked
2 = Lid Locked
Hot and cold valves open for 40 seconds, pause for 15 seconds, then drains to empty. Display will
update the water level in mm.
Cold valve open for 20 seconds, then hot valve open for 20 seconds. Drain to empty. Display will
update the inlet thermistor temperature throughout.
Display will show the current detergent percent level in the Load&Go drawer. Output may be less than
actual detergent level.
Notes
DO NOT REMOVE OR DESTROY