Part Names And Functions; Main Unit - Pioneer Elite PRO-1010HD Manual De Instrucciones

Part Names and Functions

Main Unit

Main unit
2 3
Main unit
1
Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 7).
2
ON indicator
Lights green when the plasma display is operating
(page 29).
When flashing, the indicator is used to indicate error
messages (page 50).
3
STANDBY indicator
Lights red when the unit is in standby mode (page 29).
When flashing, the indicator is used to indicate error
messages (page 50).
4
Handles
The plasma displays utilize differing methods of handle
attachment, but the handles themselves are used in the
same way.
Operation panel on the main unit
5
STANDBY/ON button
Press to put the display in operation or standby mode
(page 29).
6
INPUT button
Press to select the input (page 29).
PRO-810HD
4
4
PRO-1010HD
1
7
MENU button
Press to open and close the on-screen menu (pages
22 to 47).
8
ADJUST ( / / / ) buttons
Use these buttons to move the onscreen cursor
between selection options, and to perform
adjustments. Instructions for use are given with each
command option onscreen (pages 22 to 47).
9
VOLUME (+/–) buttons
When not indicated for use in onscreen menu items,
these buttons are used for adjusting the sound
volume (pages 29 and 30).
0
SET/DISPLAY button
Use to confirm onscreen menu selections, and to
change settings (pages 22 to 47).
When not indicated by onscreen menus, used to
display the current set status (page 30).
-
SCREEN SIZE button
Press to select the screen size (page 30).
=
AUTO SET UP button
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
values (page 39).
Operation panel on the main unit
9
5
6
7
8
0
-
=
5
EN