Picture Adjustment (3) - Pioneer Elite PRO-1010HD Manual De Instrucciones

Picture and Screen Adjustment
¶ Adjustment items during PC signal input
Decrease
CONTRAST ..... Contrast becomes weaker
BRIGHTNESS ... Picture becomes darker
H. ENHANCE ... Horizontal images become softer Horizontal images become sharper
V. ENHANCE ... Vertical images become softer Vertical images become sharper
Picture Adjustment (2)
You can save picture adjustment values for each INPUT
and each AV SELECTION mode.
MENU
5/∞
2/3
SET
Display operating Remote control unit
panel
1
Press the AV SELECTION button to select the
desired mode (Refer to page 33).
2
Press the MENU button to display the menu.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
PICTURE RESET
ENTER
SET
3
Use the 5/∞ buttons to select the item (second
page of the menu), then press the SET button.
PICTURE SCREEN
GRADATION
COLOR TEMP.
R. HIGH
G. HIGH
B. HIGH
R. LOW
G. LOW
B. LOW
36
EN
Increase
Contrast becomes stronger
Picture becomes brighter
MENU
2/3
SET
5/∞
AV
SELECTION
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
MID
:
MID
:
ON
EXIT
MENU
SETUP OPTION
:
DRE MID
:
MID
:
0
:
0
:
0
:
0
:
0
: 0
4 Use the 2/3 buttons to adjust picture quality to
the desired setting.
G R A D AT I O N
SET SET
5
Press the SET button.
Adjustment values are saved, and you return to the
display shown in step 3.
6
After completing settings, press the MENU button
to return to the normal display.
¶ Setting items during video input
GRADATION
This function sets DRE which boosts γ characteristics and
contrast of pictures.
Note
This setting is not possible when in the DYNAMIC mode in [AV
SELECTION].
Each time you press the 2/3 buttons, the setting
changes as follows:
3 DRE LOW 2 3 DRE MID 2
3 GAMMA2.2 2 3 GAMMA2.0 2
¶ DRE LOW ...... Boosts contrast with DRE.
¶ DRE MID ...... Boosts contrast more than DRE LOW to
provide the standard setting.
¶ DRE HIGH...... Boosts contrast more than DRE MID to
provide a brighter picture.
¶ GAMMA1.8 ... Provides a brighter γ setting than
standard.
¶ GAMMA2.0 ... Provides standard brightness γ
characteristics.
¶ GAMMA2.2 ... Provides darker γ characteristics than
standard.
COLOR TEMP .
Sets white color tone as desired.
Note
This setting is not possible when in the DYNAMIC mode in [AV
SELECTION].
Each time you press the 2/3 buttons, the setting
changes as follows:
:
DRE MID
MENU EXIT
3 DRE HIGH 2
3 GAMMA1.8 2