Inserting The Inflow Tube Set; Fig. 5-11 Tube Set Elements; Fig. 5-12 Inserting The Tube Set - Hologic Aquilex Instrucciones De Uso

5.9

Inserting the Inflow Tube Set

(1)
(10)
(See Fig. Tube set elements [} 33]) The inflow tube set consists of three tube sec-
tions, a Y-connector (4) and two bag spikes (2). The three tube sections are: Roller
wheel section (6), inflow section (5), and hysteroscope section (8). The bag spikes
(2) are used to connect the tube sections to the fluid bags.
The Luer lock connector (9) connects the hysteroscope tube with the hysteroscope.
3
2
1
(9)
(8)
3
2
1
(7) (6) (5)
Fig. 5–11 Tube set elements
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Fig. 5–12 Inserting the tube set
(1)
(2)
(3)
(4)
System Operation
(1) Protective caps
(2) Bag spikes
(3) Tube clamps
(4) Y-connector
(5) Inflow section
(6) Roller wheel section
(7)
Pressure chamber with mem-
brane and RFID transponder
(8) Hysteroscope section
(9) Luer lock connector (blue)
(10) Roller wheel connector
(1)
Fluid bags
(2) Bag spikes
(3) Bag clamps
(4) Y-connector
(5) Inflow tube
(6) Roller wheel tube
(7)
Pressure chamber with mem-
brane and RFID transponder
(8) Hysteroscope tube
(9) Luer lock connector (blue)
en
33 / 378