Harken Industrial R27 Manual De Instrucciones página 17

Drill a Ø 10mm hole in the rail centreline through the
top surface only for the removable endstop.
Endstops must be mounted no farther than 50 mm
from the last fastener fixing rail to structure.
WARNING!
Always be sure the pinstop is securely fastened to a pinstop hole in the rail. The bottom
of the knob must be nearly flush with the body of the endstop. Failure to seat in a pinstop hole
can result in a fall which could result in severe injury or death.
WARNING!
Removable endstops MUST be tethered to the system or a suitable anchor point to prevent falling
objects.
24/07/20
CORRECT
ENGLISH
INCORRECT
17