R27 Rail; Components - Harken Industrial R27 Manual De Instrucciones

THE RAIL

R27 RAIL

The anodized aluminium R27 rail (IN1643, IN1643.CLEAR, IN1650, IN1650.CLEAR) must be fastened to a
supporting structure using suitable screws. A low friction trolley (IN9565, IN9565.CLEAR, IN9608,
IN9608.CLEAR, IN9606, IN9606.CLEAR, IN10614, IN10614.CLEAR, IN10615, IN10615.CLEAR, IN10567,
IN10567.CLEAR, IN158, IN158.CLEAR, INCAR1-CURVE, INCAR1-CURVE (BLACK), INCAR2-CURVE, INCAR2-
CURVE (BLACK)), is to be installed to the rail, providing a compliant EN795:2012 Type B mobile anchorage
point. This assembly includes a rigid fall arrest system, designed to be used and installed in horizontal
position (± 5°) with floor, wall and ceiling mount. By installing and using this system correctly, the risk of the
operators falling whilst working at height can be eliminated or significantly reduced.
Furthermore, the R27 rail can be used as a Rope Access Anchorage System, to provide a safe anchorage for
twin rope working (rope access & work positioning), with good anchor mobility under load.

COMPONENTS

The R27 rail must be used with the following components in order to constitute the Harken Access
Rail system:
Trolleys
IN9565.CLEAR
IN9565
6
IN9606.CLEAR
IN9606
IN9608.CLEAR
IN9608
IN158.CLEAR INCAR-1 CURVE
IN158 INCAR-1 CURVE (BLACK)
ENGLISH
IN10614.CLEAR
IN10614
INCAR-2 CURVE
INCAR-2 CURVE (BLACK)
IN10567.CLEAR
IN10567
IN10615.CLEAR
IN10615
24/07/20