Accu-Chek Nano Manual Del Usuario página 30

5
Meter Memory, Setup, and Data Transfer
Setting the Beeper On or OFF
NOTE
The beeper prompts you:
• to apply blood or control solution to the test strip.
• when enough blood or control solution is drawn
into the test strip.
• when the blood glucose or control test is complete.
1
Turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold until
set-up appears on the
display.
28
2
Press and release
repeatedly until the flashing
beeper symbol and On or
OFF appear.
• when a button is pressed.
• when it is time to perform a test (if you set the test
reminders or post-meal test reminder).
• if an error occurred while performing a blood
glucose or control test (even if the beeper is o , it
still beeps for an error).
3
Press and release or
to switch between On
and OFF.
To set up more options,
press and release .
To exit, press and hold
until the flashing test strip
symbol appears on the
display.