Cleaning And Disinfecting The Meter - Accu-Chek Nano Manual Del Usuario

6
Meter and Lancing Device Cleaning and Disinfecting

Cleaning and Disinfecting the Meter

To clean and disinfect without damaging the meter, follow these procedures carefully.
When to Clean and Disinfect the Meter
• Clean the meter to remove visible dirt or other material prior to disinfecting.
• Clean and disinfect the meter at least once per week and when blood is present on the surface of the meter.
• Clean and disinfect the meter before allowing anyone else to handle the meter. Do not allow anyone else to
use the meter on themselves for testing purposes.
NOTE
If you notice any of the following signs of deterioration after cleaning and disinfecting the meter, contact the
Accu-Chek Customer Care Service Center at 1-800-858-8072: Residue around buttons, clouding of display,
or button malfunction.
What to Clean and Disinfect
The following parts of the meter should be cleaned and disinfected:
• The area around slots and openings (do not get any moisture in slots or openings)
• The meter display
• The entire meter surface
34