Starting Engine - Serpento YARA 200 Manual De Usuario Y Mantenimiento

STARTING ENGINE

WARNING: Don't start the engine in a narrow place, in order to avoid danger.Always start the engine with the transmission in neutral,
or the parts will be damaged and cause to traffic accident.
Turn the fuelcock lever to the "on" position.
Insert the ignition key into ignition switch, turn to " " position.
Put the gearshift lever in neutral.the neutral indicator light(green)will light
When the engine is cold,turn the choke lever to"close"position,untill the engine work normally,return the choke lever to the benginning position.
Check tire – check front and rear tire's pressure, crack.Compruebe el nivel de electrolito de la batería.
Check sto rage ba ttery el ectrolyte – check electrolyte's position.
Check throttle grip's action – check stanza air valve's action, steel cable's
Conjunction and handle's route of free travel, it is necessary to regulate and change.
Check illuminate and horn – check headlamp, taillamp,turn signal lamp,brake Lamp,indicator lamp and horn whether normal or not.
Check drive chain – check chain's tension,lube oil. If it has serious wear away and damage , it should be changed.
Check steering bar – check the steering bar's flexibility and stability
WARNING: Don't step the start lever too powerfully,in order not to hurt foot and engine Cover.
14