Serpento YARA 200 Manual De Usuario Y Mantenimiento página 45

• YARA 200
MANUAL DEL USUARIO
1) Hold the motorcycle vertically with main stand in flat surfaces.
Oil poisition indicator Oil dipstick
Top line Bottom line
2) Remove the oil filler cap.
3) Drain the oil by removing the drain plug located on the bottom of the engine.
4) Tighten the drain plug，replenish with new engine oil. Tighten the filler cap. Do not over screw the filler cap.
NOTE: Without replacing filter element, 910ml of new oil is enough.
5)Start up engine by idling speed for a few minutes.
6)Stop the engine and wait a minute. Inspect the engine oil level through the engine oil level lens. Make sure that oil level is up to"F".
CAUTION: Be sure to use engine oil recommended in the section Replacement of spark plug.
17