First Time Use; Daily Use - Franke FSM 86 HE XS Manual De Usuario

FIRST TIME USE

1.
SETTING THE TIME
You will need to set the time of the day when you
switch on the appliance for the first time: "AUTO" and
"0�00" flash on the display�
A
U
T
O
To set the time of day, press buttons
same time: Set the time of day using the
buttons�
Press the time button to confirm�
Having selected the desired time value, it is possible
to change the alarm tone: the display shows "ton 1"�
A
U
T
O
To select the desired tone, press button
the time button to confirm�
Please note: To change the time of the day afterwards for
example following lengthy power outages, proceed as
described above.

DAILY USE

1.
SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require�
2.
ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob to set the temperature you require�
To interrupt the function at any time, switch off the
oven, turn the selection knob and the thermostat knob
to �
STEAM CLEANING
To activate the "Steam Cleaning" cleaning function,
pour 200 ml of drinking water into the bottom of the
oven, then turn the selection knob and the thermostat
knob to the icon�
It is best to use the function for 35'�
3.
PREHEATING
Once the function has been activated, the LED
thermostat will switch on signalling that the
preheating process has begun�
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: At this point, place the food inside
and proceed with cooking�
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result.
6
2.
HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal�
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours�
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside it�
and at the
Heat the oven to 250° C for about one hour,
and
preferably using the "Convection bake" function� The
oven must be empty during this time�
Follow the instructions for setting the function
correctly�
Notes: It is advisable to air the room after using the appliance
for the first time.
, then press
. USING THE ELECTRONIC PROGRAMMER
By pressing the time button it is possible to select
various mode to keep or program the cooking time�
Please note: After few seconds without any interaction, a
buzzer sounds and all settings will be confirmed.
1� Button – : to decrease the value shown on the
display
2� Button
3� Button +: to increase the value shown on the
display
A. The symbol
operation
B. The
made
. PROGRAMMING COOKING
After selecting and activating the function, it is
possible to set the duration�
DURATION
Press for at least 2 seconds the time button: the
symbol flashes�
: for selecting the various settings
indicates that the timer function is in
symbol confirms the setting has been
AUTO
A
U
T
O
1 2
B
A
3