EN
The Auto symbol remains lit during the
wait for delayed start and for the entire
duration of cooking.
The symbol
for delayed start and remains fixed
when cooking starts.
An acoustic signal sounds at the end
of cooking; to silence it, press Set
or allow the signal to continue for its
duration.
Semiautomatic programme with
duration or end time
Programme time setting
X
X
To select the programme duration or end
time press the Mode or Set button twice
and set the required time with the + and –
buttons.
During duration or end time adjustment
mode selection, the corresponding
Auto symbol flashes.
Once a programme duration
is set, the end time cannot be
decreased. Likewise, the duration of
a programme cannot be prolonged
once the end time is set.
Programme run
When the automatic programme is in
progress (and therefore the cooking
function is active), the Auto symbol
remains lit and the remaining cooking
time appears on the display in
countdown form. The symbol
remains lit.
Automatic programme end
At the end of the programme duration
or when the end time is reached, the
corresponding symbol
At the end of the automatic
programme, the Auto symbol flashes,
the display shows "End" and an
intermittent acoustic signal (which can
be stopped by pressing Set) sounds.
MA 82 M _/F / MA 86 M _/F
flashes during the wait
also
goes off.
– 12 –
Timer function
The timer allows the setting of a time from
which a countdown begins. This function does
not turn the oven on or off, but only sounds an
audible alarm when the time has elapsed.
X
X
Press the Mode or Set button once;
the display shows:
The bell symbol flashes, then the alarm
duration can be set with the + and –
buttons. When this function is active, the
bell symbol remains lit and the display
shows the remaining time (countdown).
At the end of the time an acoustic
signal (which can be stopped by
pressing Set) sounds.
Modifying/deleting data
X
X
The set data can be changed at any time by
pressing the + and - buttons together.
Cancelling the cooking duration
automatically ends the function, and
vice versa.
In case of programmed operation, the
appliance will not accept end of cooking
times prior to those of start of cooking
proposed by the appliance itself.
Note: The oven stays hot at around the set
cooking temperature for a long time after
it has been switched off; therefore to avoid
overcooking or burning the food, it is advisable
to remove it from the oven.
Switching on the first time
X
X
When using the oven for the first time,
operate it empty with the temperature knob
set to maximum for at least 40 minutes and
airing the room.
The odour noticed during this
operation is due to the evaporation
of substances used to protect the
oven during the period between
manufacture and installation.
After the 40 minutes, the oven stops
automatically and will be ready for use
after cooling down the oven.