Operating Position - Nogueira HAYNOG-300 Manual De Instrucciones

OPERATING POSITION

TRANSPORT
POSITION
Perform the following procedure to change the
machine into the OPERATING position:
1- Couple the machine to the tractor.
FASTENER
EVER
ROPE
2- Pull the rope to unblock the fastener lever
(fig.16).
NOTE:
Move the machine a little towards the side to
pull the rope (fig.17), this will facilitate
unblocking the lever (fig.16).
OPERATING
POSITION
HAYNOG-300
MOVE THE MACHINE
TO THE SIDE
15