Operation; General Instructions; Spreading - Nogueira HAYNOG-300 Manual De Instrucciones

Operation

GENERAL INSTRUCTIONS

Lower the hydraulic system of the tractor to a floating position, so that the tractor can adjust to the
ground. It is essential to achieve good operation to keep the power take-off rotation between 350 and
540 rpm, thus this reduce wear and wasting hay.
Avoid sudden turn towards the right to avoid damaging the driveshaft.
Each adjustment, including forward speeds and the power take-off, must be appropriate for the local
circumstances.
CAUTION

Spreading

1- Place the machine in the operating position, as expressed in the instruction on the previous page.
2- Place the springs in the "spreading" position (fig.18), in both rotors.
16
The springs move almost imperceptibly when the rotors are moving.
Careful and do not touch them!
Keep a safe distance from the operating machine.
Instructions Manual
SWATH