Switching; Number Withhold Function - Medion MD 81920 Manual Del Usuario

Special Functions

Switching

This function can be used to switch a call
to another handset belonging to the same
base station. Proceed as follows:
Press the MENU button during the call.
Select the "Internal call" sub-menu.
Press the MENU key.
Enter the number of the required
handset.
The handset will then be called.
If your call is taken on the other handset
you announce an external call.
Press the HANG UP button.
The external caller is connected to the
other handset.
If your call is not taken on the other
handset press the HANG UP button.
You will be speaking with the external
caller again.
44

Number withhold function

If you have requested number
identification (CLIP) from your network
operator your telephone number will be
displayed on the extension called. If you
wish to withhold your number you can
disable the number identification for the
next call via the "Anonymous call"
function.
Press the MENU key.
Select the "Anonymous call" menu.
Press the MENU key.
"Number" appears on the display.
Enter the relevant telephone number
using the numeric keys.
You can also use an entry in the call
number memory, call list or redial list.
Proceed as follows when "Number"
appears in the display:
Press the MENU key.
Select the required option.
Press the MENU key.
Select the required entry.
Press the MENU key.
The connection is established without
disclosing the telephone number. The
caller will not see your telephone number.