Commissioning - SOMFY Sonesse 30 ZIGBEE Li-ion Manual

EN

2.3. COMMISSIONING

2.3.1. Start-up
To set the drive, you need to access and use Set&Go Connect Application,
You must have a compatible phone or mobile device and access to the internet.
The App is downloadable for free from Apple Store platforms and Google Play Store on the following
mobile devices:
• Apple iPhone® mobile phone or mobile device with iOS operating system
running iOS 11 and later.
• Mobile phone or mobile device with operating system Android™ OS 6.0
and later.
The software version of the Set&Go Connect Application may be updated
from time to time to add new features and services.
2.3.2. Drive settings
• Once the Set&Go Connect Application is downloaded, open the app and follow the
instructions to set the drive.
• Once the drive is set, check the settings by pressing the button on the motor head:
- To start the motorised product movement, briefly press the button on the motor head.
- To stop the motorised product movement, briefly press the button on the motor head.
- To move the motorised product in the opposite direction of the previous movement, briefly
press the button on the motor head again.
- To stop the motorised product movement, briefly press the button on the motor head, and
so on.
2.3.3. Network management
͉
͉
Network status when the motor wakes up: if the product makes 1 back and forth movement, it is
linked to a network.If the product makes 3 back and forth movements, it is not linked to any network.
To join a network :
• Follow the instructions on the Set&Go Connect application,
• Press and hold the motor head programming button until the product makes 2
back and forth movements (the first feedback after 2 seconds and the second after 7 seconds).
4 Copyright 2017 - 2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
Sonesse 30 WF Zigbee Li-Ion