Eu Declaration Of Conformity; Responsibilities Of The User - Abicor Binzel WWS-CAT Instructivo De Servicio

WWS-CAT
1 Identification

1.1 EU Declaration of Conformity

Designation
Relevant EC Directives
Harmonized standard applied
Tab. 1 EU Declaration of Conformity

1.2 Responsibilities of the User

The tool change system WWS-CAT is used in industry and in the trade for the
fully automatic tool change. These operating instructions only describe the tool
change system WWS-CAT. The tool change system WWS-CAT may only be
operated with original ABICOR BINZEL spare parts.
according to the EC Directives:
Machinery 2006/42/EC,
Electromagnetic Compatibility 2004/108/EC.
We, Alexander Binzel Schweisstechnik GmbH & Co. KG
hereby declare that, on the basis of its design and construction, the tool change
system WWS-CAT described in these operating instructions complies with the
basic safety and health requirements of the EC directive. Any modification not
agreed with us will void this declaration.
Legal representative of the documentation: Hubert Metzger
Kiesacker 7-9, 35418 Alten-Buseck
Tool change system WWS-CAT
Machinery 2006/42/EC,
Electromagnetic Compatibility 2004/108/EC.
DIN EN ISO 12 100
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torch and welding unit
comply with the EC EMC Directive (04/108/EC) and that the signal utilization
of the integrated welding current monitoring against stray currents is installed
properly.
1 Identification
EN - 3