Lcd Display And On-Screen Content; Lcd Display - JVC BD-X200E Instrucciones

LCD Display and On-Screen Content

LCD Display

The following information and data is presented on the DVD recorder's LCD display.
No.
1 Encoding format for audio recordings (LPCM, DOLBY DIGITAL, MPEG)
Recording mode : The encoding format set using AUDIO ENCODE from the RECORDER MENU (1/2) screen is
Playback mode : The encoding format used for audio on the current disc is displayed.
2 Information relevant to the current mode.
Title number / Chapter number / Counter
● When in Recording mode, the LCD display indicates the title number and chapter number currently being recorded,
in addition to either the elapsed title-recording time or the remaining disc space.
The SET button can be pressed to toggle between display of the elapsed recording time and the remaining disc
space in the counter area.
● When in Playback mode, the LCD display presents the title number and chapter number currently being played,
in addition to either the elapsed title-playback time or the remaining title-playback time.
The SET button can be pressed to toggle between display of elapsed and remaining title-playback time in the
counter area.
Note
The remaining disc and title time depend on the amount of data comprising video, and for this reason, they
should be taken as being a general indication and not an exact figure.
E-14
OPERATE
DVD RECORDER BD-X200
AUDIO
TITLE CHAPTER
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES REV STOP PLAY FWD PAUSE
TITLE
DOLBY DIGITAL
1
LPCM MPEG
displayed.
TITLE CHAP
SET button
BUSY
OPEN/CLOSE
OPTION DV Y/C LINE
SET UP
SET
REC TOP
MENU MENU
CHAP
2
Description
TITLE
Elapsed title-recording time (Hour:Minute:Second)
Remaining disc space
(Hour:Minute)
CHAP