Schlage L9000 Serie Instrucciones De Instalación página 6

13
INDICATOR TRIM ONLY
Install inside INDICATOR with thumbturn or cylinder
13a Install the indicator mounting plate.
Secure the mounting plate with four (4) screws.
Note: Cylinder applications require only two (2) screws.
All functions
mounting plate
13b Install the indicator slide and cam.
Thumb turn only: Place cam on spindle first, then place
indicator slide over cam/spindle assembly.
Indicator
slide
Cam (cylinder)
Thumb turn only
Spindle
Indicator
Interior
13c Connect the cam to the indicator slide. The cam must
engage either the left or right side of the indicator slide
according to door handing.
• Unlock the door.
• Move the indicator slide against the top rim of the
mounting plate (unlocked position).
• Position the cam as shown.
Lock Type
Non-deadbolt
functions
Deadbolt
RH/RR
functions
INSIDE INDICATOR
Door Hand
LH/LR RH/RR
LH/LR
6