Connect Ductwork - Broan Best KEX222 Manual Del Usuario

CONNECT DUCTWORK

1. Use mounting screws (4,8x38mm) and wall
anchors to secure flue mounting bracket
to the ceiling or wall as shown.
2. Use 8" round metal duct to connect the duct
collar on the hood to the ductwork above.
3. Use duct tape to make all joints secure and
air tight.
4. Remove the 2 screws securing the flues.
5. Turn the upper flue over so that the holes
is in the upper part.
6. Secure the decorative flue to the mounting
bracket, and to the hood by tightening locking
mounting screws (3,9x9,5mm) as shown.
FASTEN FLUE TO
BRACKET WITH
MOUNTING SCREWS
(3,9x9,5mm)
FASTEN FLUE
TO HOOD
WITH MOUNTING
SCREWS
(3,9x9,5mm)
- 11 -
FIXING TO THE WALL
MOUNTING
SCREWS
(4,8x38mm)
FIXING TO THE CEILING
MOUNTING
SCREWS
(4,8x38mm)
FLUE
MOUNTING
BRACKET
FLUE
MOUNTING
BRACKET
DECORATIVE
FLUE
REMOVE
THE
SCREWS
DUCT TAPE
8" ROUND
METAL DUCT