Sirona CEREC MC XL Manual Del Usuario página 77

Sirona Dental Systems GmbH
Operating MC XL via WLAN in the Ad-hoc mode CEREC / inLab MC XL
Switching the units off and on again
Switching the units off and on again
61 90 545 D 3439
D 3439.031.03.01.02 06.2007
Fig. 4-12 Linksys handshake
Click the "Connect to Network" button.
9.
The following window appears.
The channel change of the acquisition unit (with LINKSYS WLAN card) is
completed.
Fig. 4-13 AdHoc mode link information
1. Power down the PC.
2. Switch the acquisition unit and the milling unit off and on again.
3. Analyze the connection quality with the newly set WLAN channel as
described in the chapter entitled "Analyzing connection quality" [ 26].
4 Final work
Changing channels in the Ad-hoc mode
37