Configuring The Mc Xl In The Ad-Hoc Mode; Preparations - Sirona CEREC MC XL Manual Del Usuario

Sirona Dental Systems GmbH
Operating MC XL via WLAN in the Ad-hoc mode CEREC / inLab MC XL
Connecting the PC to the milling
unit
Opening network connections
Opening network connections
Deactivating the WLAN card
Deactivating the WLAN card
61 90 545 D 3439
D 3439.031.03.01.02 06.2007
2
Configuring the MC XL in the Ad-
hoc mode
2.1

Preparations

Fig. 2-1 Connection between a PC and a milling unit.
Connect the WLAN port of the milling unit to the LAN port of a PC via a
crossover network cable (Order no. 60 06 626).
NOTE: Connection via a network cable
Use the WLAN configuration cable included in the scope of supply (Order
no. 61 50 994) for milling units up to and including serial number 103000.
Click "Start" / "Settings" / "Control panel" in the task bar.
1.
Double-click the "Network Connections" icon in the "Control
2.
panel" window.
The "Network Connections" window then opens.
Click the "Wireless Network Connection" with the device name
1.
Cisco Aironet 02.11a/b/g Wireless Adapter or ... Wireless-G PCI ...
with the right mouse button.
Select "deactivate".
2.

2 Configuring the MC XL in the Ad-hoc mode

Preparations
5